Measurement-computing CB-7080 Bedienungsanleitung PDF herunterladen (Seite 18)

CB-7080 & CB-7080D Counter/Timer User's Guide %AANNTTCCFF

2-4

%AANNTTCCFF

Description: Set the configuration of a module.

Syntax: %AANNTTCCFF[chk](cr)

% A delimiter character.

AA Current 2-character HEX module address, from 00 to FF

NN New 2-character HEX module address, from 00 to FF

TT Input type code, refer to Table 1-10.

CC Baud rate code, refer to Table 1-8.

FF Status code, refer to Table 1-9.

[chk] 2-character checksum. If checksum is disabled, no [chk]

(cr) 0x0D

Response:

Valid response: !AA[chk](cr)

Invalid response: ?AA[chk](cr)

No response Syntax error, communication error or address error.

! A delimiter character indicating a valid response

? A delimiter character indicating an invalid response

AA 2-character HEX module address

[chk] 2-character checksum. If checksum is disabled, no [chk]

(cr) 0x0D

Examples:

The address of module 01 is configured to a new address 02, counter mode:

command: %0102500600(cr)

response: !02(cr)

Change to frequency mode:

command: %0202510600(cr)

response: !02(cr)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 73 74

Keine Kommentare

Measurement-computing CB-7080 Bedienungsanleitung Seite 18