Measurement-computing Analyzer488 Bedienungsanleitung PDF herunterladen (Seite 265)

Appendix E Analyzer488 Error Messages

E.1

Analyzer488 Error Messages

The following error messages are returned if an error condition exists and the

STATUS command is executed. The error condition is reset after the message is sent.

Only the most recent error is maintained.

Error No. Error Text and Description

00 OK

01 INVALID ADDRESS

Caused by an invalid address outside the allowable IEEE 488 bus range

of 00 to 30 for primary addresses and 00 to 31 for secondary addresses.

02 INVALID COMMAND

Caused by an unrecognized command or invalid parameter.

03 WRONG MODE

Caused by trying to execute a command not allowed within the present

state of the interface.

04 Unassigned - Reserved

05 Unassigned - Reserved

06 Unassigned - Reserved

07 Unassigned - Reserved

08 COMMAND OVERFLOW

More than 127 characters were received and interpreted as a command.

09 ADDRESS OVERFLOW

More than 15 primary address/secondary address pairs were received.

10 MESSAGE OVERFLOW

No memory is available to buffer the received data of the OUTPUT

command.

1 2 ... 260 261 262 263 264 265 266 267 268 269 270 ... 280 281

Keine Kommentare

Measurement-computing Analyzer488 Bedienungsanleitung Seite 265