Measurement-computing Analyzer488 Bedienungsanleitung PDF herunterladen (Seite 245)

100

101

Section 6 Instrument Simulator

6.35

Execute X

Commands sent to the Analyzer488 will result in no action until the instrument is

instructed to execute these commands. This is done by sending an

, usually as the last

character of a command string. Most commands sent without an

are stored in an

internal buffer until an

is received. The

D/string/

, and

(query) commands

do not need an

Execute

command. Any number of

Execute

commands may be

inserted into the same command string.

SYNTAX:

commandX

Execute

command

EXAMPLES:

PRINT#1,"CLEAR10"

reset the Analyzer488

PRINT#1,"OUTPUT10;T2000"

send

T2000

to the Analyzer488

command input buffer. This will

cause the Analyzer488 to generate

a Service Request after 2 seconds

PRINT#1,"OUTPUT10;X"

instruct the Analyzer488 to execute

its command input buffer. The

Analyzer488 will start timing upon

receipt of the

1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 280 281

Kommentare zu diesen Handbüchern

Keine Kommentare

Measurement-computing Analyzer488 Bedienungsanleitung Seite 245

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Measurement-computing Analyzer488