Measurement-computing USB-PDISO8/40 Bedienungsanleitung PDF herunterladen (Seite 18)

USB-PDISO8/40 User's Guide Specifications

Power

Table 3. Power specifications

Parameter Conditions Specification

USB +5 V input voltage range. 4.75 V min. to

5.25 V max.

USB +5 V supply current All modes of operation 10 mA max

External power input 9 V nominal

External power supply (required) MCC p/n CB-PWR-9 9 V ±10% @ 1 A

6.5 V > V

ext

or V

ext

> 12.5 V (Note 1) PWR LED = Off (power fault) Voltage supervisor limits - PWR

LED

6.5 V ≤ V

ext

< 12.5 V PWR LED = On

All relays on, 100 mA downstream hub power 820 mA typ, 900 mA max External power consumption

All relays off, 0 A downstream hub power 200 mA typ, 230 mA max

Note 1: The USB-PDISO8/40 monitors the external +9 V power supply voltage with a voltage

supervisory circuit. If this power supply exceeds its specified limit, the

PWR LED will turn off,

indicating a power fault condition.

External power output

Table 4. External power output specifications

Parameter Conditions Specification

External power output - current range Note 2 4.0 A max.

External power output Voltage drop between power input and daisy

chain power output

0.5 V max

Compatible cable(s) for daisy chain C-MAPWR-x x = 2 ,3 or 6 feet

Note 2: The daisy chain power output allows multiple USB Series products with a USB hub output port

to be powered from a single external power source in a daisy chain fashion. The voltage drop

between the module power supply input and the daisy chain output is 0.5 V max. Users must plan

for this drop to assure the last module in the chain will receive at least 6.5 VDC

USB specifications

Table 5. USB specifications

USB "B" connector Input

USB device type USB 2.0 (full-speed)

Device compatibility USB 1.1, USB 2.0

USB "A" connector Downstream hub output port

Supports USB 2.0 high-speed, full-speed and low-speed operating points USB hub type

Self-powered, 100 mA max downstream VBUS capability

Compatible products MCC USB Series products with a USB hub output port

USB cable type (upstream and

downstream)

A-B cable, UL type AWM 2527 or equivalent. (min 24 AWG VBUS/GND, min 28

AWG D+/D-)

USB cable length 3 meters max.

Mechanical

Table 6. Mechanical specifications

304.3 mm (L) x 121.9 mm (W) x 17.8 mm (H)

Card dimensions

12.0" (L) x 4.8" (W) x 0.7" (H)

342.9 mm (L) x 125.7 mm (W) x 58.9 mm (H) Enclosure dimensions

13.5" (L) x 4.95" (W) x 2.32" (H)

4-2

1 2 ... 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Measurement-computing USB-PDISO8/40 Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Measurement-computing USB-PDISO8/40