Measurement-computing PCI-DAS4020/12 Bedienungsanleitung PDF herunterladen (Seite 11)

PCI-DAS4020/12 User's Guide Installing the PCI-DAS4020/12

Connecting the board for I/O operations

Connectors, cables – I/O connectors

The table below lists the board connectors, applicable cables, and compatible accessory products for the PCI-

DAS4020/12.

Board connectors, cables, compatible hardware

Connector type

 BNC connector: five standard female connectors

 Auxiliary connector (P3): 40-pin header connector

Compatible cables (for the

40-pin auxiliary connector)

 C40FF-x

 C40-37F-x

 BP40-37-x

Compatible accessory products

with the C40FF-x cable

CIO-MINI40

Compatible accessory products

with the C40-37F-x cable

with the BP40-37-x and the C37FF-x or

C37FFS-x cable

 CIO-MINI37

 SCB-37

 CIO-ERB24

 CIO-ERB08

 SSR-RACK24

 SSR-RACK08

Information on signal connections

General information regarding signal connection and configuration is available in the Guide to Signal

Connections. This document is available on our web site at www.mccdaq.com/signals/signals.pdf.

BNC connectors

The board’s analog input and trigger input connectors are standard female BNC connectors that are visible from

the rear of the computer when you install the board.

Channel 0

Channel 1

Channel 2

Channel 3

TRIG /Ext Clk

Figure 1. Analog inputs and trigger input BNC connectors

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Keine Kommentare

Measurement-computing PCI-DAS4020/12 Bedienungsanleitung Seite 11