Measurement-computing LogBook Series Bedienungsanleitung PDF herunterladen (Seite 53)

LogBook User’s Manual 957096 System Expansion 4-9

P3 - Pulse Frequency/High-Speed Digital I/O

Pin Signal Name Description for P3 Pin Use

1 IR INPUT Interrupt line input

2 IR ENABLE Interrupt line enable

3 HSD 7 High-speed digital I/O bit 7 (low byte)

4 HSD 6 High-speed digital I/O bit 6 (low byte)

5 HSD 5 High-speed digital I/O bit 5 (low byte)

6 HSD 4 High-speed digital I/O bit 4 (low byte)

7 HSD 3 High-speed digital I/O bit 3 (low byte)

8 HSD 2 High-speed digital I/O bit 2 (low byte)

9 HSD 1 High-speed digital I/O bit 1 (low byte)

10 HSD 0 High-speed digital I/O bit 0 (low byte)

11 GND Digital ground

12 C/D-

13 WR-

14 RD-

15 TMR 0 OUT Timer 0 output

16 TMR 1 OUT Timer 1 output

17 CNT 2 IN Counter 2 input

18 CNT 0 IN Counter 0 input

19 +15 VDC +15 V supply @ 0.050 A

20 +5 V +5 V supply @ 0.100 A

21 N/C Pin not connected/not used

22 HSD 15 High-speed digital I/O bit 15 (high byte)

23 HSD 14 High-speed digital I/O bit 14 (high byte)

24 HSD 13 High-speed digital I/O bit 13 (high byte)

25 HSD 12 High-speed digital I/O bit 12 (high byte)

26 HSD 11 High-speed digital I/O bit 11 (high byte)

27 HSD 10 High-speed digital I/O bit 10 (high byte)

28 HSD 9 High-speed digital I/O bit 9 (high byte)

29 HSD 8 High-speed digital I/O bit 8 (high byte)

30 AGND Analog ground

31 AOUT0 / Scan Analog output 0, optional LBK2: 16-bit, 100 kHz, ±10 VDC DAC

32 AOUT1 / Trigger Analog output 1, optional LBK2: 16-bit, 100 kHz, ±10 VDC DAC

33 AOUT2 / Clock Analog output 2, optional LBK2: 16-bit, 100 kHz, ±10 VDC DAC

34 AOUT3 / DigOut Analog output 3, optional LBK2: 16-bit, 100 kHz, ±10 VDC DAC

35 CNT 3 IN Counter 3 input

36 CNT 1 IN Counter 1 input

37 -15 VDC -15 V supply @ 0.050 A

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 221 222

Keine Kommentare

Measurement-computing LogBook Series Bedienungsanleitung Seite 53