Measurement-computing DAQLog User Guide Bedienungsanleitung PDF herunterladen (Seite 12)

Chapter 4

Working with Devices

DAQLog automatically detects all LGR-5320 devices that are installed and connected to your computer’s USB port.

Devices are detected when you first run DAQLog, and also if you install a device while DAQLog is running.

Devices are listed in the

Logger Devices area of the Locations pane.

Viewing logger device information

When you select a logger device and select Device Info in the Available Items location, the following information

about the device appears in the DAQLog window:

 LGR-5320 Series device type

 serial number

 firmware version

 FPGA version

Synchronizing a device’s onboard clock

The Onboard Clock field lists the current time set on the device's internal clock.

To synchronize the clock of a LGR-5320 Series device with your computer’s clock, click

Sync.

The onboard clock does not change for daylight savings time. It keeps real time relative to the time synchronized.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Keine Kommentare

Measurement-computing DAQLog User Guide Bedienungsanleitung Seite 12