
PCI-DAS6023 and PCI-DAS6025 User's Guide Specifications
36
82C55 (PCI-DAS6025 only)
Table 16. 82C55 specifications (PCI-DAS6025)
24 (FIRSTPORTA 0 through FIRSTPORTC 7)
2 banks of 8 and 2 banks of 4 or
2 banks of 8 with handshake
Pull up/pull-down configuration
All pins pulled up to +5 V via 47 K resistors (default). Positions available for
pull-down to ground (factory configured option).
2.0 V min, 5.5 V absolute max
0.8 V max, –0.5 V absolute min
Output high voltage (IOH = -2.5 mA)
Output low voltage (IOL = 2.5 mA)
Input mode (high impedance)
Interrupts
Table 17. Interrupt specifications
PCI INTA# - mapped to IRQn via PCI BIOS at boot-time
Programmable through PLX9080
ADC Interrupt sources
(software programmable)
DAQ_ACTIVE: Interrupt is generated when a DAQ sequence is active.
DAQ_STOP: Interrupt is generated when A/D Stop Trigger In is
detected.
DAQ_DONE: Interrupt is generated when a DAQ sequence completes.
DAQ_FIFO_1/4_FULL: Interrupt is generated when ADC FIFO is ¼ full.
DAQ_SINGLE: Interrupt is generated after each conversion completes.
DAQ_EOSCAN: Interrupt is generated after the last channel is converted in
multi-channel scans.
DAQ_EOSEQ: Interrupt is generated after each interval delay during
multi-channel scans.
DAC Interrupt sources
(software programmable)
DAC_ACTIVE: Interrupt is generated when DAC waveform circuitry is
active.
DAC_DONE: Interrupt is generated when a DAC sequence completes.
DAC_FIFO_1/4_EMPTY: Interrupt is generated DAC FIFO is ¼ empty.
DAC_HIGH_CHANNEL: Interrupt is generated when the DAC high channel output
is updated.
Kommentare zu diesen Handbüchern