
PCI-DAS1002 User's Manual Specifications
20
Analog output
Table 6. Analog output specifications
Voltage output, single-ended
±10 V, ±5 V, 0 to 10 V, or 0 to 5 V. Software selectable. Each channel independently
programmable.
Guaranteed monotonic over temperature
Overall analog output drift
4 µs to 0.01% of 10 V step
Output short-circuit duration
Double buffered output latches
Output voltage on power up and reset: ±200 mV
Absolute accuracy
Table 7. Absolute accuracy specifications (analog output)
Calibrated accuracy components
Table 8. Calibrated accuracy specifications (analog output)
Differential linearity error
Each PCI-DAS1002 is tested at the factory to assure absolute accuracy.
Total analog output error is a combination of gain, offset, integral linearity and differential linearity error. The
theoretical worst-case error of the board may be calculated by summing these component errors. Worst case
error is realized only in the unlikely event that each of the component errors are at their maximum level, and
causing error in the same direction. Although an examination of the chart and a summation of the maximum
theoretical errors shows that the board could theoretically exhibit a ±3.5 LSB error, our testing assures this error
is never realized in a board that we ship.
Kommentare zu diesen Handbüchern