Measurement-computing LGR-5320 Series Bedienungsanleitung PDF herunterladen (Seite 14)

LGR-5320 Series User's Guide Functional Details

 IND button—Cycles through and selectively enables/disables LEDs with each button press. By default, all

LEDs are enabled when the device is powered on.

o If you press the button when the LEDs are in their default setting, only the LEDs on top of the device

are enabled.

o If you press the button again, all LEDs are disabled.

o If you press the button again, all LEDs are enabled.



TRIG/EVENT button—Forces a trigger if logging has started and the device is waiting for a trigger. Adds an

event to the event log if they are being recorded.

 START button—Starts logging when an SD card with a valid configuration file is in the SD card slot, and

the device is disconnected from a USB port. When a device is logging data, pressing this button stops the

data logging.

 SAVE button—Saves the current logging configuration to a file on the SD card.



LOAD button—Loads the latest logging configuration file from the SD card.

Screw terminals and associated LEDs

1 Digital input terminals and LEDs 4 Analog input 0–3, 8–11 (SE), 0–3 (Diff) terminals and LEDs.

Digital trigger, pacer, isolated, earth, and analog ground

terminals, and digital output state LED

Counter input 0 and 1 terminals, LEDs, and configuration

switches*

Analog input 4–7, 12–15 (SE), 4–7 (Diff) terminals and

LEDs

Counter input 2 and 3 terminals, LEDs, and configuration

switches*

* Configuration switches only apply to quadrature counters and

are only installed on the LGR-5327 and LGR-5329.

Figure 6. LGR-5320 Series screw terminals and LEDs

Figure 7. Screw terminal LED on

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 42 43

Keine Kommentare

Measurement-computing LGR-5320 Series Bedienungsanleitung Seite 14