Measurement-computing Data Acquisition Systems rev.10.4 Bedienungsanleitung Seite 93
- Seite / 366
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Counter Channel Flags (DaqBook/2000 Series; 1000, 2000, 3000 Series DaqBoards; DaqLab/2000 Series,
DaqScan/2000 Series and cPCI DaqBoard/2000c Series,WaveBook/516; WBK17)
DafCtr16
Channel is the 16-bit Counter Counter Channels (0-3) Note 1
DafCtr32Low
Channel is the Lower 16 bits of the 32-bit Counter 32-bit Counter Low Word (0,2) Note 1
DafCtr32High
Channel is the Higher 16 bits of the 32-bit Counter 32-bit Counter High Word (1,3) Note 1
Note 1: The channel numbers provided for “Counter Channel Flags,” apply to the DaqBook/2000 Series,
DaqLab/2000 Series, DaqScan/2000 Series; “1000, 2000, 3000 Series DaqBoards;” and
cPCI DaqBoard/2000c Series products only.
WBK17 Digital Output Port Flags
DafDigital8
Digital Output Port (Byte) Reading of Digital Output
DafDigital16
Digital Output Port and Detector (Byte) << 8 Reading of Digital Output
SSH Hold/Sample Flag - For Internal Use Only
DafSSHSample
Internal use only N/A
DafSSHHold
Internal use only N/A
Sampling Interval Control (Applies to the following Series Devices: /3000, /2000, and DaqBoard/1000)
DafSettle1us
Allow 1 µs sampling interval (3000 Series Only)
DafSettle1us applies only to valid Analog
Channels on 3000 Series devices.
In order to obtain the maximum sampling rate for 3000 Series devices,
DafSettle1us must be used!
DafSettle5us
Allow 5 µs sampling interval
Any valid Analog, Digital, or Counter Channel
DafSettle10us
Allow 10 µs sampling interval
Any valid Analog, Digital or Counter Channel
DafSettle1ms
Allow 1000us (1ms) sampling interval For use with DBK90 Channels
Clear or shift the least significant nibble (DaqBook/1xx,DaqBoard/1xx)
DafIgnoreLSNibble
Ignore the least significant nibble Any valid Analog, Digital, or Counter Channel
DafClearLSNibble
Clear the least significant nibble Any valid Analog, Digital, or Counter Channel
DafShiftLSNibble
Shift the least significant nibble Any valid Analog, Digital, or Counter Channel
Thermocouple Type Connected to Input
DafTcTypeNone
No Thermocouple Any DBK19, DBK52,DBK81-84,DBK90
DafTcTypeJ
J Type Thermocouple Any DBK19, DBK52,DBK81-84,DBK90
DafTcTypeK
K Type Thermocouple Any DBK19, DBK52,DBK81-84,DBK90
DafTcTypeT
T Type Thermocouple Any DBK19, DBK52,DBK81-84,DBK90
DafTcTypeE
E Type Thermocouple Any DBK19, DBK52,DBK81-84,DBK90
DafTcTypeN28
N28 Type Thermocouple Any DBK19, DBK52,DBK81-84,DBK90
DafTcTypeN14
N14 Type Thermocouple Any DBK19, DBK52,DBK81-84,DBK90
DafTcTypeS
S Type Thermocouple Any DBK19, DBK52,DBK81-84,DBK90
DafTcTypeR
R Type Thermocouple Any DBK19, DBK52,DBK81-84,DBK90
DafTcTypeB
B Type Thermocouple Any DBK19, DBK52,DBK81-84,DBK90
DafTcCJC
CJC Channel Any DBK19, DBK52,DBK81-84,DBK90
64 Channel Cards (DBK90 only)
Daf64ChannelExp
Specifies 64-channel local addressing DBK90 only
Setpoint flags Setpoint Flags are used with /3000 Series devices only
Definition Description
DafSetPointEnable
Enable Setpoint detection. = 0x08000000
DafSetPointStatus
Enable the control status read in the scan list. =0x8001
Note: Also see daqADCSetSetpoints (for /3000 Series Devices Only)
Programmer’s Manual 987693 Daq API Command Reference 4.2-37
- *372195A-01* 1
- How to use this Manual 3
- 908494 Programmer’s Manual 4
- Table of Contents 5
- Introduction 1 7
- Language Support 8
- Driver Installation 9
- 908494 Programmer’s Manual 10
- Data Acquisition Environment 11
- Signal Environment 12
- 988594 Programmer’s Manual 14
- For x% = 0 To 3 30
- 0, 0, x%, bitVal&) 30
- Next x% 30
- Zero Compensation 33
- Linear Conversion 35
- End Sub 36
- Using Multiple Devices 3 37
- Internal Clock Method 40
- Master Clock Method 41
- External Clock Method 43
- Overview 45
- 938395 Programmer’s Manual 46
- Mask and Flag Definitions 50
- 961 962 963 ... 999 59
- 941 942 ... 958 959 960 59
- Raw Data Formats 81
- Setting the Scan Rate 89
- Scan Rate Mode 89
- Scan Rate State 90
- Actual Scan Rate 90
- 94
- DBK16-Read Offset Trimpot 95
- DBK43-Read Offset Trimpot 96
- Typical flags Settings 100
- Settings 101
- Prototypes 102
- Program References 102
- Function Usage 104
- Visual BASIC 105
- Returns 114
- Data Transfer Progress 115
- Example Acquisition States 116
- DazcNone 124
- DazcAutoZero 124
- Parameter Type Description 129
- Definition Description 129
- Purpose 131
- Offset value to apply 142
- Parameter Values 144
- parameters 148
- Parameter Summary 150
- Parameter Type Definitions 150
- Moving Averages 160
- Definition Description 165
- Using Thermocouples (T/Cs) 172
- T/C Gains Settings 173
- Daq/2000 Series devices* 174
- Setting the Output Mode 184
- Buffer Management 201
- DAC0 DAC1 DAC2 DAC3 P3 DO 202
- DAC0 DAC2 P3 DO 202
- Note 1: 206
- Offset for header in bytes 208
- Update Cycle Data Blocks 211
- Update/Sample Data Format 212
- Output From File Operation 212
- DaqBoard/2000c Series 219
- Setting the DAC Value 227
- 908794 Programmer’s Manual 232
- (continued) 249
- DdiProtocolInfo 251
- DdiExtFeatures 251
- Local I/O 262
- Expansion I/O 262
- Local I/O 266
- 957193 Programmer’s Manual 280
- (for 14 sample settings 282
- 2, 4, 8, 16, 32, 64 282
- 128, etc. up to 16384) 282
- Option Value (optionValue) 284
- Counter Mode 285
- 908594 Programmer’s Manual 286
- Set the Excitation Source 289
- DmotWbk14ExcSrcApply 289
- Sets the Dac Offset 290
- Use DC coupling when 290
- Example: 291
- DcovWbk17Mode_Period 295
- DcovWbk17Mode_Pulsewidth 296
- DcovWbk17Mode_Timing 296
- DcovWbk17Mode_Encoder 296
- Setting the Trigger Level 306
- API Error Codes - daqError 319
- A2 - 162 331
- Programmer’s Manual 332
- Appendix A A 333
- 988294 Programmer’s Manual 334
- 939198 Programmer’s Manual 336
- Custom OEM Installation C 337
- WIN 9x/Me WIN NT/2000/XP 338
- WIN 9x/Me and 338
- WIN NT/2000/XP 338
- Installation Locations: 339
- 958293 Programmer’s Manual 340
- 938295 Programmer’s Manual 342
- Format 347
- Time-of-Day Configuration 356
- Glossary 359
- 986896 Programmer’s Manual 360
- 986896 Glossary G-3 361
- 986896 Glossary G-5 363
- 986896 Glossary G-7 365
Verwandte Produkte und Handbücher für Hardware Measurement-computing Data Acquisition Systems rev.10.4
(44 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.060 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern