Measurement-computing Data Acquisition Systems rev.10.4 Bedienungsanleitung PDF herunterladen (Seite 331)

Programmer’s Manual 908594 Daq API Command Reference 4.7-13

API Error Codes (Cont.) – daqError

Error Name Code # hex-dec Description

DerrSetpointCountMismatch A0 - 160

Setpoint Count Mismatch – The number of Setpoints does not equal the number

of channel setpoint flags set.

Corrective Actions:

• Correct the mismatch situation. Each Setpoint must have one

associated channel setpoint flag set.

DerrSetpointLevelInvalid A1 - 161

Setpoint Level Invalid – The Setpoint Level is outside the channel’s range.

Corrective Actions:

• Change the Setpoint Level and/or the associated channel’s range such

that the Setpoint Level falls within the channel’s range.

DerrSetpointOutputType A2 - 162

Setpoint Output Type Invalid – The Setpoint Output Type is invalid.

Corrective Actions:

• Set an appropriate output type for the setpoint.

DerrSetpointOutputValue A3 - 163

Setpoint Output Value Invalid – The Setpoint Output Value is outside the

channel’s range.

Corrective Actions:

• Change the Setpoint Output value and/or the associated channel’s

range such that the setpoint output value falls within the channel’s

range.

DerrSetpointLimits A3 - 164

Setpoint Comparison – Error flags when Limit B is greater than Limit A. For

outside or inside window limits (DsfOutsideLimits, DsfInsideLimits) and

for hysteresis (DsfHysteresis) Limit A must be greater than Limit B.

Corrective Actions:

• Ensure that the value for Limit A is greater than the value for Limit B.

1 2 ... 326 327 328 329 330 331 332 333 334 335 336 ... 365 366

Keine Kommentare

Measurement-computing Data Acquisition Systems rev.10.4 Bedienungsanleitung Seite 331