Measurement-computing CB-COM-7021 Bedienungsanleitung PDF herunterladen (Seite 57)

CB-7021, CB-7022, CB-7024 User’s Manual

2.24 $AA9NTS

Description: Set DA Configuration of Channel N

Note: The command is for CB-7022 only.

Syntax: $AA9NTS[CHK](cr)

$ Delimiter character

AA Address of reading module (00 to FF)

9 Command for setting DA configuration

N Channel to set DA configuration (0 to 1)

T Analog output type. Refer Sec. 1.10 for type select

S Analog output slew rate. Refer Sec. 1.10 for slew rate

select

Response: Valid Command: !AA[CHK](cr)

Invalid Command: ?AA[CHK](cr)

Syntax error or communication error may not get

a response.

! Delimiter for valid command

? Delimiter for invalid command

AA Address of response module (00 to FF)

Example:

Command: $019121 Receive: !01

Set address 01 channel 1 DA configuration: 0 to 10V output

and slew rate 0.625V/Second, returns successful.

Related Command:

Sec. 2.23 $AA9N

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 75 76

Keine Kommentare

Measurement-computing CB-COM-7021 Bedienungsanleitung Seite 57