Measurement-computing CB-COM-7021 Bedienungsanleitung PDF herunterladen (Seite 29)

CB-7021, CB-7022, CB-7024 User’s Manual

2.1 %AANNTTCCFF

Description: Set module Configuration

Syntax: %AANNTTCCFF[CHK](cr)

% Delimiter character

AA Address of setting module (00 to FF)

NN New address for setting module (00 to FF)

TT New type for setting module (Ref Sec. 1.10)

CC New baud rate for setting module (Ref Sec. 1.10)

FF New data format for setting module (Ref Sec. 1.10)

When changing the baud rate or checksum, short the

INIT* pin to ground.

Response: Valid Command: !AA[CHK](cr)

Invalid Command: ?AA[CHK](cr)

Syntax error or communication error may get no re-

sponse.

! Delimiter for valid command

? Delimiter for invalid command. While changing baud rate

or checksum setting without shorting INIT* to ground, the

module will returns an invalid command message.

AA Address of response module (00 to FF)

Example:

Command: %0102300600 Receive: !02

Change address from 01 to 02, returns successful.

Related Command:

Sec. 2.2 $AA2

Keine Kommentare

Measurement-computing CB-COM-7021 Bedienungsanleitung Seite 29