Measurement-computing CIO-DUAL-AC5 Bedienungsanleitung PDF herunterladen (Seite 11)

CIO-DUAL-AC5 User's Guide Installing the CIO-DUAL-AC5

Connecting the board for I/O operations

Connectors, cables – main I/O connector

The table below lists the board connector, applicable cables, and compatible accessory products.

Board connector, cables, and accessory equipment

Connector type

50-pin header connectors (2)

Compatible cables

C50FE-x

C50FF-x

Compatible accessory products with the

C50FE-x

SSR-PB24

Compatible accessory products with the

C50FF-x

CIO-TERM100

CIO-SPADE50

CIO-MINI50

SCB-50

SCB-100

Pin out – I/O connectors

The CIO-DUAL-AC5 I/O uses two 50-pin header-type connectors. These connectors are board-mounted and

are not accessible on the rear of the PC expansion backplate. The signals available are direct connections to an

82C55 digital I/O integrated circuit.

Figure 2 shows the pin outs for the connectors. The pin assignments for each are identical for each group of 24

pins (three, eight-I/O ports).

 The front connector (P1) is for first Port A, first Port B, and first Port C I/O lines (at BASE + 0, 1, and 2).

 The rear connector (P2) is for second Port A, second Port B and second Port C (at BASE + 4, 5, and 6).

Figure 2. I/O connector pin out — P1 and P2 connectors

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

Measurement-computing CIO-DUAL-AC5 Bedienungsanleitung Seite 11