Measurement-computing USB-5100 Series Bedienungsanleitung PDF herunterladen (Seite 49)

Chapter 5

Hardware Reference

Refer to the following topics for more information on using USB-5100 Series with specific devices:

 Updating USB-5100 Series Logger Firmware

 Fixing a

Read Header Failed Error

Updating USB-5100 Series Logger Firmware

All data on the device is erased when you update the firmware. To avoid loss of data, be sure to read out any

data on the USB-5100 Series logger before updating the firmware.

Determining the installed firmware version:

Complete the following steps to determine the firmware version currently installed on a USB-5100 Series

logger:

1. Connect the logger to a computer and run the USB-5100 Series.

7. Select

Device»Status to open the Status dialog box.

8. Click

Yes if the Logger's Power Reset dialog box opens.

The currently installed firmware version is displayed in the

Device Identification area of the dialog box.

Figure 30. Device Identification Area Showing Firmware Version

Updating the firmware

Complete the following steps to update the firmware on a USB-5100 Series logger:

1. Download the firmware file (

.hex) from www.mccdaq.com/firmware and copy it to the desktop.

2. Connect the USB-5100 Series logger to your computer.

3. Select

Help»Update Device Firmware»Update USB-5100 Series Firmware, and click Yes in the Update

USB-5100 Series Firmware dialog box.

4. Navigate to the desktop, select the firmware file, and then click

Select.

5. Click

Continue in the Update USB-5100 Series Firmware dialog box.

6. Click

Yes when prompted to upgrade the firmware on the device.

Firmware Update Complete dialog box displays after the firmware is installed.

7. Click

Yes to open the Launch Logger dialog box, or No to close the Firmware Update Complete dialog

box.

You must launch the USB-5100 Series logger before it can be used again.

8. Click

Yes in the Logger's Power Reset dialog box each time this dialog box displays until the logger is

relaunched.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 63 64

Keine Kommentare

Measurement-computing USB-5100 Series Bedienungsanleitung Seite 49