Measurement-computing WaveBook rev.3.0 Bedienungsanleitung PDF herunterladen (Seite 125)

WaveBook User’s Manual,

5-20-99

PostView 6-11

Note: When a chart contains overlapping channels which share values (such that their traces reside on top

of each other), the more recent channel will obscure the earlier channel. Note that the lower a

channel is on the display list, the more recent it is in regard to the display.

Adding Channel 2 to Chart 1

Another variation of the Display Configuration Setup box appears when you highlight a channel. In the

following figure, Channel 1 (of Chart 1, Group 1) was selected, resulting in a new screen image. From this

screen you can edit the channel setup.

Adjusting Channel Setup for Channel 1

PostView channels can be set for either of two modes: Units Full Scale or, Units/Div. The mode is selected

by radio button. Mode descriptions are as follows:

Units Full Scale. When Units Full Scale is selected, as depicted in the above figure, you can alter Y Max

and Y Min. These are the upper and lower limits of the channel, as they will appear on the chart when the

channel is selected. When you change either parameter, Y Center and Units/Division are automatically

adjusted. You can not directly adjust Y Center or Units/Division while “Units Full Scale” is selected. You

can change Y Max and Y Min by using the up and down arrows, or by highlighting the existing value,

typing in the new value, the pressing “Enter” on your PC keyboard.

Note: If the window size is changed, a chart operating in the Units Full Scale mode will maintain its

full scale setting across the chart.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 235 236

Keine Kommentare

Measurement-computing WaveBook rev.3.0 Bedienungsanleitung Seite 125