
11
Chapter 3
Functional Details
Components
The USB-2404-10 has the following external components:
Screw terminal connectors
USB port
LED
Strain relief slot for USB cable
Figure 2. Front panel (Screw terminal connections)
Figure 3. Rear panel (USB connection and LED)
Screw terminals (CH0 to CH3)
The USB-2404-10 has four 2-terminal detachable screw terminals for connection to four isolated analog inputs.
The maximum sampling rate is 50 kS/s per channel, and the input voltage range is ±10 V, nominal. The
channels may be sampled individually or simultaneously. Signal assignments are listed in the following table.
Screw terminal pin assignments
Use 16 AWG to 28 AWG wires to connect signals to the device.
Kommentare zu diesen Handbüchern