
USB-2020 User's Guide Functional Details
40-pin to 37-pin signal mapping
Signal mapping on the C40-37F-x cable is not a one-to-one ratio. The following table lists the pin numbers of
the signals on the 40-pin end and the pin numbers of the associated signals on the 37-pin end.
Signal mapping on the C40-37F-x cable
40-pin cable end 37-pin cable end
Signal connections
Analog input
The USB-2020 has two single-ended simultaneous sampling analog inputs that provide sampling at rates of up
to 20 MS/s to internal memory when using BURSTIO and at rates of up to 8 MS/s (system-dependent) to the
host computer in continuous scan mode. The input ranges are software-selectable for ±10 V, ±5 V, ±2 V, ±1 V.
When using BURSTIO, the internal memory can store up to 64 megasamples at the maximum rate for transfer
to the computer after the acquisition is complete. Data is transferred to the host computer at a maximum rate of
8 MS/s (system-dependent).
14
Kommentare zu diesen Handbüchern