Measurement-computing USB-1608GX-2AO-OEM Bedienungsanleitung PDF herunterladen (Seite 13)

USB-1608GX-2AO-OEM User's Guide Functional Details

Figure 4 shows DIFF channels 0-3 connected to a ground path resistor.

Figure 4. DIFF connections with ground path resistor

Channel-Gain queue

The channel-gain queue feature allows you to configure a list of channels, modes, and gains for each scan. The

settings are stored in a channel-gain queue list that is written to local memory on the device.

The channel-gain queue list contains one or more channel numbers, modes, and range settings. You can

configure up to 16 elements. The channels can be listed in any order, and can include duplicate channels for

sampling at different ranges.

An example of a 4-element list is shown in the table below.

Sample channel gain queue list

Element Channel Range Mode

0 CH5 BIP5V SE

1 CH1 BIP10V SE

2 CH15 BIP1V SE

3 CH5 BIP5V SE

Carefully match the gain to the expected voltage range on the associated channel or an over range condition

may occur. Although this condition does not damage the device, it does produce a useless full-scale reading,

and can introduce a long recovery time due to saturation of the input channel.

For more information about analog signal connections

For more information about analog input connections, refer to the Guide to Signal Connections (this document

is available on our web site at www.mccdaq.com/signals/signals.pdf).

Analog output

The two 16-bit analog outputs (AOUT0 and AOUT1) can be updated simultaneously at a rate of 250 kS/s per

channel. One output can be updated at a rate of 500 kS/s. The output range is fixed at ±10 V. The outputs

default to 0 V when the host computer is shut down or suspended, or when a reset command is issued to the

device.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Keine Kommentare

Measurement-computing USB-1608GX-2AO-OEM Bedienungsanleitung Seite 13