Measurement-computing USB-1208FS-Plus-OEM Bedienungsanleitung PDF herunterladen (Seite 21)

USB-1208FS-Plus-OEM User's Guide Specifications

Analog output

Table 8. Analog output specifications

Parameter Condition Specification

Resolution

12-bits, 1 in 4,096

Output range

0 V to 5.0 V

Number of channels

Throughput (Note 4) Software paced 250 S/s single channel typ, PC dependent

Hardware paced 50 kS/s max per channel

Power on and reset voltage

Initializes to 000h code

Output drive Each D/A OUT 5 mA, sourcing

Slew rate

0.8 V/ µs typ

Note 4: Maximum throughput when scanning is machine dependent.

Table 9. Analog output accuracy, all values are (±); accuracy tested at no load

Range Accuracy (LSB)

0 V to 5.0 V 4.0 typ, 45.0 max

Table 10. Analog output accuracy components, all values are (±)

Range % of FSR Gain Error at FS (mV) Offset (mV)

(Note 5)

Accuracy at FS (mV)

0 V to 5.0 V 0.1 typ, 0.9 max 4.0 typ, 36.0 max 1.0 typ, 9.0 max 4.0 typ, 45.0 max

Note 5: Zero-scale offsets may result in a fixed zero-scale error producing a "dead-band” digital input code

region. In this case, changes in digital input code at values less than 0x040 may not produce a

corresponding change in the output voltage. The offset error is tested and specified at code 0x040.

Digital input/output

Table 11. Digital I/O specifications

Parameter Specification

Digital type CMOS

Number of I/O 16 (Port A0 through A7, Port B0 through B7)

Configuration 2 banks of 8. Port B is high current drive.

Pull up/pull-down configuration All pins pulled up to 5 V via 47 kΩ resistors (default). Change to pull-down using

internal user-configurable jumpers.

Input high voltage threshold 2.0 V min

Input high voltage limit 5.5 V absolute max

Input low voltage threshold 0.8 V max

Input low voltage limit –0.5 V absolute min

0 V recommended min

Output high voltage, Port A 4.4 V min (IOH = –20 µA)

3.84 V min (IOH = –6.0 mA)

Output low voltage, Port A 0.1 V max (IOL = 20 µA)

0.33 V max (IOL = 6.0 mA)

Output high voltage, Port B 4.4 V min (IOH = –50 µA)

3.76 V min (IOH = –24.0 mA)

Output low voltage, Port B 0.1 V max (IOH = 50 µA)

0.44 V max (IOH = 24.0 mA)

Power on and reset state Input

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

Kommentare zu diesen Handbüchern

Keine Kommentare

Measurement-computing USB-1208FS-Plus-OEM Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Measurement-computing USB-1208FS-Plus-OEM