Measurement-computing SC-1608 Series Bedienungsanleitung PDF herunterladen (Seite 15)

SC-1608 Series User's Guide Functional Details

Figure 5. J1 and J2 power schematic

Power switch

SW1 is the main power switch that provides power to the baseboard when it is switched on and when an

external supply is connected to either J1 or J2.

E-1608-OEM connectors

Socket connectors J3 and J4 connect with the header connectors on an E-1608-OEM board.

The J37 header connector is used to power the E-1608-OEM. When the E-1608-OEM connects to the

baseboard, its power input header (W1) mates with the baseboard power header connector (J37).

The E-1608-OEM receives power from the SCC-8-8-2 baseboard

Do not connect an external supply to the E-1608-OEM barrel input connector.

Pinout tables for J3, J4, and J37 are listed in the Specifications chapter.

USB-1608G-OEM Series connectors

Socket connectors J5 and J6 connect with the header connectors on a USB-1608G-OEM Series board. The

connectors are keyed to ensure proper board orientation. Pinout tables for socket connectors J5 and J6 are listed

in the Specifications chapter.

50-pin User I/O header connector

J35 is a 50-pin header connector where all conditioned and non-conditioned input and output signals are

available for user connections.

The eight analog inputs, two analog outputs, and eight digital I/O that interface with the 8B analog I/O modules

and digital I/O modules are connected directly to this header connector. Any non-conditioned input or output

can be used as a non-isolated channel.

Do not connect to a signal being used by an analog or digital module

Be careful not to connect to a signal already in use by a digital I/O or analog I/O module.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Keine Kommentare

Measurement-computing SC-1608 Series Bedienungsanleitung Seite 15