Measurement-computing PCI-DAS1200 Bedienungsanleitung PDF herunterladen (Seite 8)

Chapter 1

Introducing the PCI-DAS1200

Overview: PCI-DAS1200 features

This manual explains how to install and use the PCI-DAS1200 board. The PCI-DAS1200 board is a

multifunction measurement and control board designed for the PCI bus.

The PCI-DAS1200 provides eight differential or 16 single-ended 12-bit analog inputs, with sample rates of up

to 330 kHz. Input ranges are either bipolar or unipolar. Bipolar input ranges are ±10V, ±5V, ±2.5V, and

±1.25V. Unipolar input ranges are 0 to 10V, 0 to 5V, 0 to 2.5V, and 0 to 1.25V. All input ranges are software-

selectable.

The PCI-DAS1200 board has two 12-bit analog output channels. The output ranges are 0 to 10V, 0 to 5V, ±10V

and ±5V.

The PCI-DAS1200 board provides 24-bits of parallel, digital I/O as two 8-bit ports and two 4-bit ports. Each

port can be configured independently as input or output.

The PCI-DAS1200 board contains an 82C54 counter chip, which consists of three 16-bit counters. Clock, gate,

and output signals from two of the three counters are available on a 100-pin I/O connector. The third counter is

used internally.

Software features

For information on the features of InstaCal and the other software included with your PCI-DAS1200, refer to

the Quick Start Guide that shipped with your device. The Quick Start Guide is also available in PDF at

www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf.

Check www.mccdaq.com/download.htm for the latest software version or versions of the software supported

under less commonly used operating systems.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Keine Kommentare

Measurement-computing PCI-DAS1200 Bedienungsanleitung Seite 8