Measurement-computing PCI-DAS08 Bedienungsanleitung PDF herunterladen (Seite 12)

PCI-DAS08 User's Guide Installing the PCI-DAS08

The red stripe

identifies pin # 1

Figure 2-2. C37FF-x cable

Figure 2-3. C37FFS-x cable

Caution! If either the AC or DC voltage is greater than 5 volts, do not connect the PCI-DAS08 to this signal

source. You are beyond the board's usable input range and will need to either adjust your

grounding system or add special isolation signal conditioning to take useful measurements. A

ground offset voltage of more than 7 volts may damage the PCI-DAS08 board and possibly your

computer. An offset voltage much greater than 7 volts will damage your electronics, and may be

hazardous to your health.

Field wiring, signal termination and signal conditioning

You can use the following MCC screw terminal boards to terminate field signals and route them into the PCI-

DAS08 board using the C37FF-x or C37FFS-x cable:

CIO-MINI37 – 37-pin screw terminal board. Details on this product are available at

www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=102&pf_id=255

SCB-37 – 37 conductor, shielded signal connection/screw terminal box that provides two independent 50-

pin connections. Details on this product are available at

www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=196&pf_id=1166

MCC provides the following analog signal conditioning products for use with your PCI-DAS08 board:

ISO-RACK08 – Isolated 8-channel, 5B module rack for analog signal conditioning and expansion. Details

on this product are available on our web site at

www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=127&pf_id=449

CIO-EXP16 – 16-channel analog multiplexer board with on-board CJC sensor. Details on this product are

available on our web site at www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=126&pf_id=249

CIO-EXP32 – 32-channel analog multiplexer board with on-board CJC sensor and 2 Gain amps. Details on

this product are available on our web site at

www.mccdaq.com/cbicatalog/cbiproduct.asp?dept_id=126&pf_id=250

2-4

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Keine Kommentare

Measurement-computing PCI-DAS08 Bedienungsanleitung Seite 12