Measurement-computing PC-CARD-DAC08 Bedienungsanleitung PDF herunterladen (Seite 11)

PC-CARD-DAC08 User's Guide Installing the PC-CARD-DAC08

Connecting the board for I/O operations

Connectors, cables – main I/O connector

The table below lists the board connector, applicable cables, and compatible accessory products.

Board connector, cables, and accessory equipment

Connector type Honda 26-pin mini D-type

Connector compatibility Translates to 37D pin out using PC-CARD-C37F/26

Compatible accessory products CIO-MINI37

SCB-37

Pin out – main I/O connector

Figure 2

Figure 2. 26-pin I/O mini-connector

shows a PC-CARD-DAC08 case looking into the male mini-connector. The connector is mechanically

keyed to insure that the cable is inserted correctly.

26-pin mini-connector pin out

Pin Signal Name Pin Signal Name

1 GND 14 EXTERNAL INTERRUPT IN

2 DIGITAL I/O 0 15 DIGITAL I/O 1

3 DIGITAL I/O 2 16 DIGITAL I/O 3

4 DIGITAL I/O 4 17 DIGITAL I/O 5

5 DIGITAL I/O 6 18 DIGITAL I/O 7

6 PC +5V OUT 19 D/A OUT 0

7 GND 20 D/A OUT 1

8 GND 21 D/A OUT 2

9 GND 22 D/A OUT 3

10 GND 23 D/A OUT 4

11 GND 24 D/A OUT 5

12 GND 25 D/A OUT 6

13 GND 26 D/A OUT 7

Connect the analog devices that you want to control with the high side to the numbered analog output, and the

low side to an adjacent ground (GND).

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Keine Kommentare

Measurement-computing PC-CARD-DAC08 Bedienungsanleitung Seite 11