Measurement-computing DaqBoard-ISA Bedienungsanleitung PDF herunterladen (Seite 33)

Daq Systems

02-13-02

DBK Basics, pg. 5

DBK Identification Tables

Analog Output DBKs

Analog Output

Product Name/Description I/O

Conectivity

DBK2 Voltage Output Card 4 channels P1

DBK5 Current Output Card 4 channels P1

Digital I/O Control DBKs

Digital I/O / Control

Product Name/Description I/O

Conectivity

DBK20 General-Purpose Digital I/O Card (Screw Terminals) 48 channels P2

DBK21 General-Purpose Digital I/O Card (DB37 Connectors) 48 channels P2

DBK23 Optically Isolated Digital-Input Module 24 channels P2

DBK24 Optically Isolated Digital-Output Module 24 channels P2

DBK25 Relay Output Card 8 channels P2

DBK208 Carrier board for Opto-22 Compatible Solid-State-Relay

Digital Modules.

Two 8-bit banks of

SSR modules

Two P2s

Analog Signal Conditioning DBKs

The DBKs that are used for analog signal conditioning attach to transducers and condition their outputs into

analog voltages. An A/D converter, located in the primary acquisition device, measures the analog

voltages. There are many signal-conditioning solutions available (and more are in development). Note that

DBK high-capacity modules require more circuitry than can fit on a compact card.

Analog Signal Conditioning

Product Name/Description I/O

Connectivity

DBK4 Dynamic Signal Input Card 2 channels P1

DBK7 Frequency-to-Voltage Input Card 4 channels P1

DBK8 High-Voltage Input Card 8 channels P1

DBK9 RTD Measurement Card 8 channels P1

DBK12 Low-Gain Analog Multiplexing Card

Note 2

16 channels P1

DBK13 High-Gain Analog Multiplexing Card

Note 2

16 channels P1

DBK15 Universal Current/Voltage Input Card

Note 2

16 channels P1

DBK16 Strain-Gage Measurement Card 2 channels P1

DBK17 Simultaneous Sample & Hold Card 4 channels P1

DBK18 Low-Pass Filter Card 4 channels P1

DBK19 Thermocouple Card

Note 2

14 channels P1

DBK42 5B Isolated Signal-Conditioning Module 16 channels P1

DBK43A Strain-Gage Measurement Module 8 channels P1

DBK44 5B Isolated Signal-Conditioning Card 2 channels P1

DBK45 SSH and Low-Pass Filter Card 4 channels P1

DBK50 Isolated High-Voltage Input Module 8 channels P1

DBK51 Isolated Low-Voltage Input Module 8 channels P1

DBK52 Thermocouple Input Module

Note 2

14 channels P1

DBK53 Low-Gain Analog Multiplexing Module

Note 2

16 channels P1

DBK54 High-Gain Analog Multiplexing Module

Note 2

16 channels P1

DBK70 Vehicle Network Interface, Analog Multiplexer Module 16 channels P1

DBK80 Differential Voltage Input Card with Excitation Output 16 channels P1

DBK81 Thermocouple Card, High-Accuracy 7 channels P1

DBK82 Thermocouple Card, High-Accuracy 14 channels P1

DBK83 Thermal Couple Card, High-Accuracy; uses Connection Pod 14 channels POD-1

DBK84 Thermocouple Module, High-Accuracy 14 channels P1

DBK207 Carrier Board for 5B Compatible Analog Input Modules 16 channels Two P1s / P4

DBK207/CJC Carrier Board for 5B Compatible Analog Input Modules.

DBK207/CJC includes cold junction compensation (CJC)

16 channels Two P1s / P4

Note 1

P1, P2, and P3 DB37 connectors do not exist on the DaqBoard/2000 Series or /2000c Series boards,

but are obtained by using P4 adapters (DBK200 series). These adapters typically connect to the

DaqBoard/2000 Series [/2000c Series] 100-pin P4 connector via a CA-195 cable.

Note 2

For DaqBoard/2000 and cPCI DaqBoard/2000 Series boards, internal clocks should be set to 100 kHz

when used with any of the following DBK options: DBK12, DBK13, DBK15, DBK19, DBK52, DBK53,

and DBK54. See specific DBK section for details.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 45 46

Kommentare zu diesen Handbüchern

Keine Kommentare

Measurement-computing DaqBoard-ISA Bedienungsanleitung Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Measurement-computing DaqBoard-ISA