Measurement-computing Digital232 Bedienungsanleitung PDF herunterladen (Seite 41)

Section 3 Command Descriptions

3.19

Test Tn

The

Test

command is used to verify hardware and LED operation. The

command will turn-off the front panel

Test LED

. The

command will turn-on the

Test LED

. The

command will cause the Digital232 to initiate a ROM/RAM test.

If the test is successful, all LEDs will flash for one-half second. If a test fails, the

Error

LED will remain illuminated. Use the

Status

command to determine the cause

of the self test error.

Example:

reset the

Digital232

turn-off the front panel Test LED

T1 turn-on the Test LED

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 58 59

Keine Kommentare

Measurement-computing Digital232 Bedienungsanleitung Seite 41