Measurement-computing DASYLab Bedienungsanleitung PDF herunterladen (Seite 22)

3-4 Configuring DASYLab for PointScan 876994 DASYLab – Standard Driver

Setup for Windows

2000

Use the below instructions to modify existing TCP/IP settings.

1. Select Start ⇒ Settings ⇒ Network and Dial-up connections

2. Double Click on Local Area Connection and click Properties.

If TCP/IP does not exist in the components window press Install ⇒ Protocol ⇒ TCP/IP.

3. Double Click on TCP/IP and fill in the Values and press OK

4. Press OK to close the network dialog and reboot your computer if instructed to do so.

Windows 2000: Example of Setting TCP/IP values

Configure the System via the IOtoolKit

Use the IOtoolKit software to perform the system configuration. Instructions are included on the CD

(see the following reference note). Configuration includes:

• setting up the IP address for PointScan modules that have a direct Ethernet connection

• setting up the pass through communication protocol to additional devices that are

using a 485 pass-through

• naming stations and channel tags

• setting measurement parameters for channels, e.g., integration time and ranges.

• saving the configuration

• verifying system communications

Reference Note:

Refer to Getting started with the IOtoolKit, located within the IOtoolKit Help document, for

instructions related to the above topics.

For backup purposes, save the settings as a project file.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 79 80

Keine Kommentare

Measurement-computing DASYLab Bedienungsanleitung Seite 22